How do I change the time and date on Nitsuko ONYX, NEC i-Series and Aspire telephone systems?

Nitsuko ONYX VS:

From Extension 300
(DO NOT LIFT HANDSET)

1. Press PGM #
2. Press 83
3. Dial two digit number for the month (01-12), press #
4. Dial two digit number for the date (01-31), press #
5. Dial two digit number for the year (00-99), press #
6. Dial two digit number for the hour (00-23), press #
   - For example, 13=1:00 PM.
7. Dial two digit number for the minutes (00-59), press #
8. Press SAVE
   - You will hear confirmation tone.
   - If you only wish to change the time do steps 1-2,
   then press the # key until you see HOUR then follow steps 6-8.

Nitsuko ONYX III:

From Extension 300

To Set the Time

1. Lift Handset
2. Press INTERCOM
3. Press PGM#
   -Your display shows, “DSS, EXT, 6,9,8?.”
4. Dial 8
   - Your display shows, “SET TIME HHMMSS.”
5. Enter two digit number for the hour (00-23: 13=1:00PM)
6. Enter two digit number for the minutes (00-59)
7. Enter two digit number for the seconds (00-59)
8. Hang up.

To Set the Date

1. Repeat steps 1-3
2. Press 9
3. Enter two digit number for the month (01-12)
4. Enter two digit number for the date (01-31)
5. Enter two digit number for the Year (00-99)
6. Hang up.

NEC i-Series:

From any display telephone.
(DO NOT LIFT HANDSET)
(You will not be prompted for any information)

1. Press CALL 1
2. Dial 828
3. Enter 0000 for password
4. Enter two digit number for the year (00-99)
5. Enter two digit number for the month (01-12)
6. Enter two digit number for the date (01-31)
7. Enter the Day of the Week (0=Sunday, 6=Saturday)
8. Enter two digit number for the hour (00-23)
   (13=1:00 PM)
9. Enter two digit number for the minutes
10. Press SPK to hang up.

NEC Aspire:

From any display telephone.
(DO NOT LIFT HANDSET)
(You will not be prompted for any information)

1. Press CALL 1
2. Dial 828
3. Dial two digit number for the hour (00-23)
   (13=1:00 PM)
4. Dial two digit number for the minutes (00-59)
   

How do I set up a conference call on my phone system?

ONYX VS and ONYX III

1. Place first call.
2. Press CONF
3. Place second call
4. Press CONF
   (Conference is now established)

i-Series and Aspire

1. Place first call.
2. Press CONF
3. Place second call
4. Press CONF, CONF
   (Conference is now established)